SN74ACT374DWRG4 Overview

It is embeded in 20-SOIC (0.295, 7.50mm Width) case. You can find it in the Tape & Reel (TR)package. Tri-State, Non-Invertedis the output configured for it. It is configured with the trigger Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates at a voltage of 4.5V~5.5V. Currently, the operating temperature is -40°C~85°C TA. This D latch has the type D-Type. This type of FPGA is a part of the 74ACT series. You should not exceed 160MHzin the output frequency of the device. The element count is 1 . Currently, there are 20 terminations. D latch belongs to the 74ACT374 family. Power is provided by a 5V supply. Its input capacitance is 4.5pF farads. Devices in the ACTfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. The 20pins are designed into the board. There is a clock edge trigger type of Positive Edgeon this device. This RS flip flops is a part number FF/Latches. The design is based on 8bits. To achieve this superior flexibility, 8 circuits are used. Considering its reliability, this T flip flop is well suited for TR. It runs on 5Vvolts of power. The flip flop has 2ports embedded within it. It is recommended that the supply voltage be kept at 5Vto maximize efficiency. The 24mA output current allows it to be designed with the greatest amount of flexibility. This D latch consumes 4μA quiescent current at all.

SN74ACT374DWRG4 Features

Tape & Reel (TR) package
74ACT series
20 pins
8 Bits
5V power supplies

SN74ACT374DWRG4 Applications

There are a lot of Texas Instruments SN74ACT374DWRG4 Flip Flops applications.

• EMI reduction circuitry
• Storage registers
• Differential Individual
• Event Detectors
• Circuit Design
• QML qualified product
• Count Modes
• Power down protection
• Safety Clamp
• ATE