74ABT374CSCX Overview
It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). As part of the package Tape & Reel (TR), it is embedded. As configured, the output uses Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. Surface Mountmounts this electrical part. A voltage of 4.5V~5.5Vis required for its operation. It is operating at -40°C~85°C TA. Logic flip flops of this type are classified as D-Type. It belongs to the 74ABTseries of FPGAs. Its output frequency should not exceed 200MHz. A total of 1elements are present in it. During its operation, it consumes 50μA quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. A voltage of 5V provides power to the D latch. Its input capacitance is 5pFfarads. The electronic device belongs to the ABTfamily. Vsup reaches its maximum value at 5.5V. If you want to maintain normal operation, you should keep the supply voltage (Vsup) above 4.5V. There are 2 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line.
74ABT374CSCX Features
Tape & Reel (TR) package
74ABT series
74ABT374CSCX Applications
There are a lot of Rochester Electronics, LLC 74ABT374CSCX Flip Flops applications.
- Communications
- Balanced Propagation Delays
- Control circuits
- Individual Asynchronous Resets
- EMI reduction circuitry
- Test & Measurement
- Single Down Count-Control Line
- Dynamic threshold performance
- Automotive
- Pattern generators
