SN74AS109ADRE4 Overview
16-SOIC (0.154, 3.90mm Width)is the packaging method. There is an embedded version in the package Tape & Reel (TR). This output is configured with Differential. The trigger configured with it uses Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. A temperature of 0°C~70°C TAis considered to be the operating temperature. Logic flip flops of this type are classified as JK Type. The FPGA belongs to the 74AS series. It should not exceed 105MHzin terms of its output frequency. D latch consists of 2 elements. This process consumes 17mA quiescents. There are 16 terminations,The 74AS109 family contains it. Power is provided by a 5V supply. An electronic device belonging to the family AScan be found here. It is mounted by the way of Surface Mount. 16pins are included in its design. In this device, the clock edge trigger type is Positive Edge. There is a base part number FF/Latchesfor the RS flip flops. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. This T flip flop features a maximum design flexibility due to its output current of 20mA. It is reported that there are 5 input lines.
SN74AS109ADRE4 Features
Tape & Reel (TR) package
74AS series
16 pins
SN74AS109ADRE4 Applications
There are a lot of Texas Instruments SN74AS109ADRE4 Flip Flops applications.
- EMI reduction circuitry
- Storage registers
- Frequency Divider circuits
- Balanced 24 mA output drivers
- Shift registers
- Instrumentation
- Consumer
- Load Control
- Clock pulse
- Reduced system switching noise
