SN74ACT534N Overview

In the form of 20-DIP (0.300, 7.62mm), it has been packaged. The package Tubecontains it. T flip flop is configured with an output of Tri-State, Inverted. Positive Edgeis the trigger it is configured with. It is mounted in the way of Through Hole. A voltage of 4.5V~5.5Vis used as the supply voltage. It is operating at -40°C~85°C TA. A flip flop of this type is classified as a D-Type. This type of FPGA is a part of the 74ACT series. You should not exceed 100MHzin the output frequency of the device. In total, it contains 1 elements. As a result, it consumes 4μA quiescent current and is not affected by external forces. There have been 20 terminations. Members of the 74ACT534family make up this object. An input voltage of 5Vpowers the D latch. The input capacitance of this T flip flop is 4.5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. ACTis the family of this D flip flop. In this case, the electronic component is mounted in the way of Through Hole. With its 20pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with a number of bits of 8. Its superior flexibility is attributed to its use of 8 circuits. The system runs on a power supply of 5V watts. The D flip flop has no ports embedded. Optimal efficiency requires a supply voltage of 5V. The output current of 24mA makes it feature maximum design flexibility. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74ACT534N Features

Tube package
74ACT series
20 pins
8 Bits
5V power supplies

SN74ACT534N Applications

There are a lot of Texas Instruments SN74ACT534N Flip Flops applications.

• Shift Registers
• Bus hold
• Storage Registers
• Registers
• Reduced system switching noise
• Functionally equivalent to the MC10/100EL29
• Control circuits
• Computers
• Single Down Count-Control Line
• ESD performance