SN74ACT574DW Overview

It is packaged in the way of 20-SOIC (0.295, 7.50mm Width). It is included in the package Tube. This output is configured with Tri-State, Non-Inverted. This trigger is configured to use Positive Edge. It is mounted in the way of Surface Mount. It operates with a supply voltage of 4.5V~5.5V. The operating temperature is -40°C~85°C TA. The type of this D latch is D-Type. The 74ACTseries comprises this type of FPGA. A frequency of 110MHzshould be the maximum output frequency. In total, there are 1 elements. This process consumes 4μA quiescents. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. D latch belongs to the 74ACT574 family. It is powered from a supply voltage of 5V. JK flip flop input capacitance is 4.5pF farads. The electronic device belongs to the ACTfamily. Electronic part Surface Mountis mounted in the way. There are 20pins on it. In this device, the clock edge trigger type is Positive Edge. This device has the base part number FF/Latches. It is designed with 8bits. Its flexibility is enhanced by 8 circuits. It operates from 5V power supplies. There are 2 ports embedded in the flip flops. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. With a current output of 24mA , it offers maximum design flexibility. It has 3lines.

SN74ACT574DW Features

Tube package
74ACT series
20 pins
8 Bits
5V power supplies

SN74ACT574DW Applications

There are a lot of Texas Instruments SN74ACT574DW Flip Flops applications.

• Shift registers
• Differential Individual
• Data transfer
• Automotive
• Bus hold
• Frequency Divider circuits
• Frequency division
• Set-reset capability
• Synchronous counter
• Balanced Propagation Delays