SN74ACT574PWG4 Overview
The item is packaged in TSSOPcases. A total of 20 terminations have been made. A voltage of 5V is used to power it. An electronic device belonging to the family ACTcan be found here. There is an electronic part mounted in the way of Surface Mount. As you can see from the design, it has pins with 20. There is a clock edge trigger type of Positive Edgeon this device. 8bits are used in its design. Despite its superior flexibility, it relies on 8 circuits to achieve it. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TUBE. The D latch operates on 5V volts. The D flip flop is embedded with 2ports. For high efficiency, the supply voltage should be set to 5V. In order to operate, the chip has 1 output lines. This input has 3lines. -24mAis set as the high level output current. There is no low level output current set at 24mA. Temperatures below 85°Care ideal for operating. Temperatures above -40°Cshould be used. The minimum voltage required for operation is 4.5V. 5.5Vis the maximum supply voltage supported by it. This can be achieved at a frequency of 110MHz. It uses the logic IC BUS DRIVER. There are 1 functions associated with the JK flip flop. 20pins are provided on the D latch. It features maximum design flexibility due to the 24mA output current.
SN74ACT574PWG4 Features
20 pins
8 Bits
5V power supplies
1 Functions
20 pin count
SN74ACT574PWG4 Applications
There are a lot of Texas Instruments
SN74ACT574PWG4 Flip Flops applications.
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
- Modulo – n – counter
