2V~5.5V 180MHz 6 Bit D-Type Flip Flop DUAL 74AHC174 16 Pins 4μA 74AHC Series 16-SOIC (0.209, 5.30mm Width)
SOT-23
SN74AHC174NSRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
16-SOIC (0.209, 5.30mm Width)
Number of Pins
16
Weight
200.686274mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
Series
74AHC
Part Status
Obsolete
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
16
Type
D-Type
Subcategory
FF/Latches
Packing Method
TAPE AND REEL
Technology
CMOS
Voltage - Supply
2V~5.5V
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
NOT SPECIFIED
Supply Voltage
3.3V
[email protected] Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
74AHC174
Function
Master Reset
Qualification Status
Not Qualified
Output Type
Non-Inverted
Number of Elements
1
Polarity
Non-Inverting
Supply Voltage-Max (Vsup)
5.5V
Power Supplies
2/5.5V
Supply Voltage-Min (Vsup)
2V
Number of Circuits
7
Load Capacitance
50pF
Output Current
8mA
Number of Bits
6
Clock Frequency
180MHz
Propagation Delay
14.5 ns
Turn On Delay Time
1 ns
Family
AHC/VHC/H/U/V
Logic Function
D-Type, Flip-Flop
Current - Quiescent (Iq)
4μA
Output Characteristics
3-STATE
Current - Output High, Low
8mA 8mA
Max I(ol)
0.008 A
Max Propagation Delay @ V, Max CL
9.2ns @ 5V, 50pF
Trigger Type
Positive Edge
Input Capacitance
1.7pF
Number of Output Lines
6
Clock Edge Trigger Type
Positive Edge
Max [email protected]
80000000Hz
Height Seated (Max)
2mm
Width
5.3mm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
SN74AHC174NSRG4 Product Details
SN74AHC174NSRG4 Overview
In the form of 16-SOIC (0.209, 5.30mm Width), it has been packaged. D flip flop is included in the Tape & Reel (TR)package. Non-Invertedis the output configured for it. It is configured with a trigger that uses Positive Edge. Surface Mountmounts this electrical part. With a supply voltage of 2V~5.5V volts, it operates. It is at -40°C~85°C TAdegrees Celsius that the system is operating. The type of this D latch is D-Type. It belongs to the 74AHCseries of FPGAs. Its output frequency should not exceed 180MHz. In total, there are 1 elements. It consumes 4μA of quiescent current without being affected by external factors. There have been 16 terminations. This D latch belongs to the family of 74AHC174. An input voltage of 3.3Vpowers the D latch. The input capacitance of this T flip flop is 1.7pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. This D flip flop belongs to the family of AHC/VHC/H/U/V. Electronic part Surface Mountis mounted in the way. 16pins are included in its design. A Positive Edgeclock edge trigger is used in this device. It is included in FF/Latches. There are 6bits in its design. Vsup reaches its maximum value at 5.5V. Normally, the supply voltage (Vsup) should be kept above 2V. The superior flexibility of this product is achieved by using 7 circuits. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. The D latch runs on a voltage of 2/5.5V volts. With an output current of 8mA, this device offers maximum design flexibility. There are 6 output lines on it.
SN74AHC174NSRG4 Features
Tape & Reel (TR) package 74AHC series 16 pins 6 Bits 2/5.5V power supplies
SN74AHC174NSRG4 Applications
There are a lot of Texas Instruments SN74AHC174NSRG4 Flip Flops applications.