SN74AHC574DWR Overview

It is embeded in 20-SOIC (0.295, 7.50mm Width) case. The package Cut Tape (CT)contains it. The output it is configured with uses Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 2V~5.5Vvolt supply, it operates as follows. It is at -40°C~85°C TAdegrees Celsius that the system is operating. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74AHC series. You should not exceed 115MHzin its output frequency. A total of 1elements are present in it. Currently, there are 20 terminations. The object belongs to the 74AHC574 family. A voltage of 3.3V is used to power it. JK flip flop input capacitance is 3pF farads. A device of this type belongs to the family of AHC/VHC/H/U/V. A part of the electronic system is mounted in the way of Surface Mount. This board has 20 pins. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Positive Edge. It is included in FF/Latches. An electronic part with 8bits has been designed. There is a 5.5Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be kept above 2V. 8 circuits are used to achieve its superior flexibility. In view of its reliability, this D flip flop is a good fit for TR. The system runs on a power supply of 2/5.5V watts. There are 2 ports embedded in the flip flops. In addition to its maximum design flexibility, the output current of the T flip flop is 8mA. It is reported that there are 3 input lines. There is 4μA quiescent current consumption by it.

SN74AHC574DWR Features

Cut Tape (CT) package
74AHC series
20 pins
8 Bits
2/5.5V power supplies

SN74AHC574DWR Applications

There are a lot of Texas Instruments SN74AHC574DWR Flip Flops applications.

• Safety Clamp
• CMOS Process
• Computers
• Frequency Divider circuits
• Synchronous counter
• QML qualified product
• Data storage
• Guaranteed simultaneous switching noise level
• Memory
• Patented noise