SN74AHC574DWRG4 Overview
The package is in the form of SOIC. As part of the package Tape & Reel (TR), it is embedded. The element count is 1 . 20terminations have occurred. It is powered by a voltage of 3.3V . A device of this type belongs to the family of AHC/VHC/H/U/V. It is mounted in the way of Surface Mount. There are 20pins on it. The clock edge trigger type for this device is Positive Edge. The RS flip flops belongs to FF/Latches base part number. A reliable performance of this D flip flop makes it well suited for use in TAPE AND REEL. The flip flop contains 2ports. A high level output current of -8mAis set. In the low level output current setting, the current is set to 8mA. Ideally, the operating temperature should be below 85°C. If the operating temperature is higher than -40°C, the system should operate properly. In order for it to operate, a supply voltage of 2Vis required. A maximum voltage of 5.5V can be provided by it. This frequency can be achieved at 115MHz. There is a logic IC BUS DRIVER used in the D flip flop. It has 1 functions. 20pins are available on this JK flip flop. With an output current of 8mA, this flip flop offers maximum design flexibility.
SN74AHC574DWRG4 Features
Tape & Reel (TR) package
20 pins
1 Functions
20 pin count
SN74AHC574DWRG4 Applications
There are a lot of Texas Instruments
SN74AHC574DWRG4 Flip Flops applications.
- Frequency Dividers
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
