SN74AHC574PWRG4 Overview

It is packaged in the way of 20-TSSOP (0.173, 4.40mm Width). It is included in the package Tape & Reel (TR). T flip flop is configured with an output of Tri-State, Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 2V~5.5Vvolts. The operating temperature is -40°C~85°C TA. This electronic flip flop is of type D-Type. JK flip flop belongs to the 74AHCseries of FPGAs. A frequency of 115MHzshould not be exceeded by its output. In total, there are 1 elements. As a result, it consumes 4μA quiescent current. 20terminations have occurred. The 74AHC574family includes it. A voltage of 3.3V provides power to the D latch. Its input capacitance is 3pFfarads. It belongs to the family of electronic devices known as AHC/VHC/H/U/V. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 20 pins. The clock edge trigger type for this device is Positive Edge. The part you are looking for is included in FF/Latches. There are 8bits in its design. There is a 5.5Vmaximum supply voltage (Vsup). Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. In order to achieve its superior flexibility, 8 circuits are used. As a result of its reliability, this D flip flop is ideally suited for TR. The power supply is 2/5.5V. This flip flop has a total of 2ports. Featuring the maximum design flexibility, it has an output current of 8mA . It has 3lines.

SN74AHC574PWRG4 Features

Tape & Reel (TR) package
74AHC series
20 pins
8 Bits
2/5.5V power supplies

SN74AHC574PWRG4 Applications

There are a lot of Texas Instruments SN74AHC574PWRG4 Flip Flops applications.

• Test & Measurement
• Circuit Design
• Functionally equivalent to the MC10/100EL29
• Dynamic threshold performance
• Clock pulse
• Shift registers
• Set-reset capability
• Communications
• Single Down Count-Control Line
• Load Control