SN74AHC74DBRG4 Overview
In the form of SSOP, it has been packaged. You can find it in the Tape & Reel (TR)package. There are 2 elements in it. A total of 14 terminations have been made. Power is provided by a 3.3V supply. A device of this type belongs to the family of AHC/VHC/H/U/V. There is an electronic component mounted in the way of Surface Mount. Basically, it is designed with a set of 14 pins. It has a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. It is reported that there are 4 input lines. -8mAis set as the high level output current. It is set to 8mAfor the low level output current. It is recommended that the operating temperature be lower than 125°C. In order for the system to operate properly, the temperature should be higher than -40°C. A minimum supply voltage of 2V is required for these RS flip flops to operate. It supports the maximal supply voltage of 5.5V. It is possible to achieve 115MHz frequencies. The logic IC it uses is D FLIP-FLOP. Currently, it is equipped with 2 functions . There are 14 pins on the D latch. It offers maximum design flexibility with its output current of 8mA.
SN74AHC74DBRG4 Features
Tape & Reel (TR) package
14 pins
2 Functions
14 pin count
SN74AHC74DBRG4 Applications
There are a lot of Texas Instruments SN74AHC74DBRG4 Flip Flops applications.
- Differential Individual
- 2 – Bit synchronous counter
- Instrumentation
- Storage registers
- CMOS Process
- ESD protection
- ESD performance
- EMI reduction circuitry
- Individual Asynchronous Resets
- Pattern generators
