SN74AHCT174DGVRE4 Overview

The package is in the form of 16-TFSOP (0.173, 4.40mm Width). A package named Tape & Reel (TR)includes it. Currently, the output is configured to use Non-Inverted. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. It is operating at a temperature of -40°C~85°C TA. There is D-Type type of electronic flip flop associated with this device. FPGAs belonging to the 74AHCTseries contain this type of chip. You should not exceed 115MHzin the output frequency of the device. A total of 1 elements are present. During its operation, it consumes 4μA quiescent energy. 16terminations have occurred. The 74AHCT174family includes it. The power supply voltage is 5V. Input capacitance of this device is 2pF farads. In terms of electronic devices, this device belongs to the AHCT/VHCT/VTfamily of devices. There is an electronic part mounted in the way of Surface Mount. The 16pins are designed into the board. This device has the clock edge trigger type of Positive Edge. This device is part of the FF/Latchesbase part number family. Vsup reaches its maximum value at 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. Using 7 circuits, it is highly flexible. In view of its reliability, this D flip flop is a good fit for TAPE AND REEL. A power supply of 5Vis required to operate it. It has 3lines.

SN74AHCT174DGVRE4 Features

Tape & Reel (TR) package
74AHCT series
16 pins
5V power supplies

SN74AHCT174DGVRE4 Applications

There are a lot of Texas Instruments SN74AHCT174DGVRE4 Flip Flops applications.

• Computers
• Test & Measurement
• Latch
• ESD protection
• Frequency Divider circuits
• Pattern generators
• Instrumentation
• Automotive
• Consumer
• Control circuits