SN74AHCT74DG4 Overview
SOICis the packaging method. A total of 2elements are present in it. A total of 14terminations have been recorded. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as AHCT/VHCT/VT. There is an electronic part that is mounted in the way of Surface Mount. The 14pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 1bits. Considering its reliability, this T flip flop is well suited for TUBE. A total of 5V power supplies are needed to run it. Optimal efficiency requires a supply voltage of 5V. A total of 1input lines have been provided. A -8mAvalue is set for the high level output current. 8mA is the low level output current. A temperature below 125°Cis recommended for operation. It is recommended that the operating temperature be greater than -40°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. We are able to achieve a frequency of 140MHz. The logic IC it uses is D FLIP-FLOP. As a result, it is equipped with 2 functions . This device is equipped with a pin count of 14.
SN74AHCT74DG4 Features
14 pins
1 Bits
5V power supplies
2 Functions
14 pin count
SN74AHCT74DG4 Applications
There are a lot of Texas Instruments
SN74AHCT74DG4 Flip Flops applications.
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
