CD74HC74M96G4 Overview
The flip flop is packaged in a case of SOIC. D latch consists of 2 elements. Terminations are 14. The power source is powered by 4.5V. Electronic devices of this type belong to the HC/UHfamily. Electronic part Surface Mountis mounted in the way. With its 14pins, it is designed to work with most electronic flip flops. In this device, the clock edge trigger type is Positive Edge. The design is based on 1bits. Due to its reliability, this T flip flop is well suited for TAPE AND REEL. This input has 1lines in it. This D latch consumes 4μA quiescent current at all. It is set to -5.2mAfor the high level output current. It is set to 5.2mAfor the low level output current. If the operating temperature is lower than 125°C, it is recommended. It should be higher than -55°Cwhen the system is operating. Normally, it operates with a voltage of 2VV as its minimum supply voltage. It supports a maximum supply voltage of 6V volts. This frequency can be achieved 50MHz. In this case, it uses a D FLIP-FLOP logic IC. It is equipped with 2 functions . The D latch is equipped with 14 pins. As a result of its output current of 5.2mA, it is very flexible in terms of design.
CD74HC74M96G4 Features
14 pins
1 Bits
2 Functions
14 pin count
CD74HC74M96G4 Applications
There are a lot of Texas Instruments
CD74HC74M96G4 Flip Flops applications.
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
- Event Detectors
- Data Synchronizers
- Asynchronous counter
