SN74ALS29821DWRE4 Overview
As a result, it is packaged as 24-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tape & Reel (TR). T flip flop is configured with an output of Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. In this case, the electronic component is mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. Temperature is set to 0°C~70°C TA. This logic flip flop is classified as type D-Type. The FPGA belongs to the 74ALS series. The element count is 1 . It consumes 115mA of quiescent current without being affected by external factors. A total of 24 terminations have been made. The object belongs to the 74ALS29821 family. It is powered by a voltage of 5V . The electronic device belongs to the ALSfamily. It is mounted by the way of Surface Mount. It is designed with 24 pins. A Positive Edgeclock edge trigger is used in this device. This device is part of the FF/Latchesbase part number family. In this case, the maximum supply voltage (Vsup) reaches 5.25V. The supply voltage (Vsup) should be maintained above 4.75V for normal operation. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. The flip flop has 2embedded ports. With an output current of 48mA, it is possible to design the device in any way you want. This input has 3lines. In addition, POWER OFF DISABLE OUTPUTS TO PERMIT LIVE INSERTIONis a characteristic of it.
SN74ALS29821DWRE4 Features
Tape & Reel (TR) package
74ALS series
24 pins
SN74ALS29821DWRE4 Applications
There are a lot of Texas Instruments SN74ALS29821DWRE4 Flip Flops applications.
- CMOS Process
- Frequency division
- Storage registers
- ATE
- Digital electronics systems
- ESCC
- Counters
- Single Down Count-Control Line
- Shift Registers
- Matched Rise and Fall
