74FCT2374ATSOCTG4 Overview
The item is packaged in 20-SOIC (0.295, 7.50mm Width)cases. You can find it in the Tape & Reel (TR)package. Currently, the output is configured to use Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. A voltage of 4.75V~5.25Vis required for its operation. A temperature of -40°C~85°C TAis considered to be the operating temperature. The type of this D latch is D-Type. In FPGA terms, D flip flop is a type of 74FCTseries FPGA. The element count is 1 . Despite external influences, it consumes 200μAof quiescent current. The number of terminations is 20. It is a member of the 74FCT2374 family. It is powered from a supply voltage of 5V. JK flip flop input capacitance is 5pF farads. FCTis the family of this D flip flop. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 20. This device exhibits a clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. An electronic part with 8bits has been designed. As soon as Vsup reaches 5.25V, the maximum supply voltage is reached. Normal operation requires a supply voltage (Vsup) above 4.75V. On the basis of its reliable performance, this D flip flop is well suited for use with TAPE AND REEL. There are 5V power supplies attached to it. A total of 2ports are embedded in the D flip flop. The output current of 12mA makes it feature maximum design flexibility. To operate, the chip has a total of 8 output lines. This frequency can be achieved 250MHz.
74FCT2374ATSOCTG4 Features
Tape & Reel (TR) package
74FCT series
20 pins
8 Bits
5V power supplies
74FCT2374ATSOCTG4 Applications
There are a lot of Texas Instruments 74FCT2374ATSOCTG4 Flip Flops applications.
- Differential Individual
- Computers
- Divide a clock signal by 2 or 4
- EMI reduction circuitry
- ESD performance
- Registers
- CMOS Process
- Individual Asynchronous Resets
- Shift registers
- Power down protection
