MC74HCT374ADW Overview
The flip flop is packaged in 20-SOIC (0.295, 7.50mm Width). There is an embedded version in the package Tube. In the configuration, Tri-State, Non-Invertedis used as the output. Positive Edgeis the trigger it is configured with. Surface Mountis in the way of this electric part. The JK flip flop operates at 4.5V~5.5Vvolts. -55°C~125°C TAis the operating temperature. There is D-Type type of electronic flip flop associated with this device. It belongs to the 74HCTseries of FPGAs. Its output frequency should not exceed 30MHz Hz. In total, it contains 1 elements. T flip flop consumes 4μA quiescent energy. There have been 20 terminations. You can search similar parts based on 74HCT374. Power is supplied from a voltage of 5V volts. A 10pFfarad input capacitance is provided by this T flip flop. In terms of electronic devices, this device belongs to the HCTfamily of devices. There is an electronic component mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. An electronic part designed with 8bits is used in this application. It reaches the maximum supply voltage (Vsup) at 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. 8 circuits are used to achieve its superior flexibility. Considering its reliability, this T flip flop is well suited for RAIL. The power supply is 5V. This flip flop has a total of 2ports. There are 3 output lines in this JK flip flop.
MC74HCT374ADW Features
Tube package
74HCT series
20 pins
8 Bits
5V power supplies
MC74HCT374ADW Applications
There are a lot of ON Semiconductor MC74HCT374ADW Flip Flops applications.
- Matched Rise and Fall
- Latch-up performance
- Automotive
- Buffered Clock
- Convert a momentary switch to a toggle switch
- Synchronous counter
- Storage registers
- Bus hold
- Clock pulse
- Individual Asynchronous Resets
