SN74ALS374ADBRE4 Overview
The flip flop is packaged in 20-SSOP (0.209, 5.30mm Width). A package named Tape & Reel (TR)includes it. T flip flop uses Tri-State, Non-Invertedas the output. Positive Edgeis the trigger it is configured with. It is mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. A temperature of 0°C~70°C TAis used in the operation. It belongs to the type D-Typeof flip flops. In terms of FPGAs, it belongs to the 74ALS series. It should not exceed 35MHzin its output frequency. In total, it contains 1 elements. There is 19mA quiescent consumption. A total of 20 terminations have been made. The 74ALS374 family contains this object. It is powered from a supply voltage of 5V. ALSis the family of this D flip flop. In this case, the electronic component is mounted in the way of Surface Mount. This board has 20 pins. A Positive Edgeclock edge trigger is used in this device. The RS flip flops belongs to FF/Latches base part number. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. An electrical current of 5V volts is applied to it. A D flip flop with 2embedded ports is available. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. With an output current of 24mA, it is possible to design the device in any way you want. A total of 3input lines have been provided.
SN74ALS374ADBRE4 Features
Tape & Reel (TR) package
74ALS series
20 pins
5V power supplies
SN74ALS374ADBRE4 Applications
There are a lot of Texas Instruments SN74ALS374ADBRE4 Flip Flops applications.
- CMOS Process
- QML qualified product
- Matched Rise and Fall
- Frequency Dividers
- Counters
- Parallel data storage
- Guaranteed simultaneous switching noise level
- Single Down Count-Control Line
- Balanced 24 mA output drivers
- Divide a clock signal by 2 or 4
