SN74ALS576BDW Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. D flip flop is embedded in the Tube package. This output is configured with Tri-State, Inverted. It is configured with the trigger Positive Edge. There is an electronic component mounted in the way of Surface Mount. A supply voltage of 4.5V~5.5V is required for operation. It is operating at 0°C~70°C TA. It belongs to the type D-Typeof flip flops. JK flip flop is a part of the 74ALSseries of FPGAs. In order for it to function properly, its output frequency should not exceed 30MHz. A total of 1elements are present in it. As a result, it consumes 18mA quiescent current and is not affected by external forces. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. D latch belongs to the 74ALS576 family. The power supply voltage is 5V. This D flip flop belongs to the family of ALS. There is an electronic part mounted in the way of Surface Mount. A total of 20pins are provided on this board. This device has Positive Edgeas its clock edge trigger type. The part you are looking for is included in Bus Driver/Transceiver. It is designed with 8bits. The D latch runs on a voltage of 5V volts. A D flip flop with 2embedded ports is available. If high efficiency is to be achieved, the supply voltage should be maintained at 5V. The output current of 24mA makes it feature maximum design flexibility. The number of input lines is 3. Currently, there are 8 channels available.

SN74ALS576BDW Features

Tube package
74ALS series
20 pins
8 Bits
5V power supplies

SN74ALS576BDW Applications

There are a lot of Texas Instruments SN74ALS576BDW Flip Flops applications.

• Parallel data storage
• Test & Measurement
• Data transfer
• Synchronous counter
• Count Modes
• Control circuits
• Supports Live Insertion
• Circuit Design
• Load Control
• Automotive