SN74ALVCH374DWRG4 Overview
The flip flop is packaged in a case of 20-SOIC (0.295, 7.50mm Width). It is contained within the Tape & Reel (TR)package. T flip flop is configured with an output of Tri-State, Non-Inverted. Positive Edgeis the trigger it is configured with. Surface Mountis positioned in the way of this electronic part. A supply voltage of 1.65V~3.6V is required for operation. In the operating environment, the temperature is -40°C~85°C TA. This D latch has the type D-Type. It is a type of FPGA belonging to the 74ALVCH series. It should not exceed 150MHzin terms of its output frequency. In total, there are 1 elements. During its operation, it consumes 10μA quiescent energy. In 20terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. This D latch belongs to the family of 74ALVCH374. Power is supplied from a voltage of 1.8V volts. Input capacitance of this device is 5pF farads. In this case, the D flip flop belongs to the ALVC/VCX/Afamily. It is mounted by the way of Surface Mount. The electronic flip flop is designed with pins 20. This device has Positive Edgeas its clock edge trigger type. The design is based on 8bits. There is a 3.6Vmaximum supply voltage (Vsup). Using 8 circuits, it is highly flexible. The flip flop has 2embedded ports.
SN74ALVCH374DWRG4 Features
Tape & Reel (TR) package
74ALVCH series
20 pins
8 Bits
SN74ALVCH374DWRG4 Applications
There are a lot of Texas Instruments SN74ALVCH374DWRG4 Flip Flops applications.
- Memory
- Storage registers
- Single Down Count-Control Line
- Guaranteed simultaneous switching noise level
- High Performance Logic for test systems
- Convert a momentary switch to a toggle switch
- Single Up Count-Control Line
- Parallel data storage
- Individual Asynchronous Resets
- Balanced 24 mA output drivers
