SN74ALVTH16374DL Overview

It is embeded in 48-BSSOP (0.295, 7.50mm Width) case. You can find it in the Tubepackage. In the configuration, Tri-State, Non-Invertedis used as the output. JK flip flop uses Positive Edgeas the trigger. The electronic part is mounted in the way of Surface Mount. It operates with a supply voltage of 2.3V~2.7V 3V~3.6V. It is operating at a temperature of -40°C~85°C TA. D-Typeis the type of this D latch. The FPGA belongs to the 74ALVTH series. There should be no greater frequency than 250MHzon its output. In total, there are 2 elements. This process consumes 100μA quiescents. In 48terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The 74ALVTH16374family includes it. An input voltage of 2.5Vpowers the D latch. There is 3.5pF input capacitance for this T flip flop. This electronic part is mounted in the way of Surface Mount. The 48pins are designed into the board. A Positive Edgeclock edge trigger is used in this device. There is a FF/Latchesbase part number assigned to the RS flip flops. It is designed with 16bits. This flip flop has a total of 2ports. Its output current of 64mAallows for maximum design flexibility. In order to operate, the chip has 1 output lines. The number of input lines is 3.

SN74ALVTH16374DL Features

Tube package
74ALVTH series
48 pins
16 Bits

SN74ALVTH16374DL Applications

There are a lot of Texas Instruments SN74ALVTH16374DL Flip Flops applications.

• Divide a clock signal by 2 or 4
• CMOS Process
• Balanced 24 mA output drivers
• Guaranteed simultaneous switching noise level
• Memory
• Reduced system switching noise
• Digital electronics systems
• Cold spare funcion
• Frequency Divider circuits
• Bounce elimination switch