SN74HCT374PW Overview

It is embeded in 20-TSSOP (0.173, 4.40mm Width) case. As part of the package Tube, it is embedded. This output is configured with Tri-State, Non-Inverted. This trigger uses the value Positive Edge. Surface Mountis positioned in the way of this electronic part. The JK flip flop operates with an input voltage of 4.5V~5.5V volts. It is operating at -40°C~85°C TA. It belongs to the type D-Typeof flip flops. The 74HCTseries comprises this type of FPGA. A frequency of 40MHzshould be the maximum output frequency. D latch consists of 1 elements. This process consumes 8μA quiescents. Currently, there are 20 terminations. The 74HCT374family includes it. It is powered from a supply voltage of 5V. JK flip flop input capacitance is 3pF farads. Electronic devices of this type belong to the HCTfamily. Electronic part Surface Mountis mounted in the way. Basically, it is designed with a set of 20 pins. The clock edge trigger type for this device is Positive Edge. The part is included in FF/Latches. An electronic part designed with 8bits is used in this application. To achieve this superior flexibility, 8 circuits are used. A total of 5V power supplies are needed to run it. The flip flop has 2embedded ports. A high level of efficiency can be achieved by maintaining the supply voltage at 5V. It offers maximum design flexibility with its output current of 6mA. There are 3 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.

SN74HCT374PW Features

Tube package
74HCT series
20 pins
8 Bits
5V power supplies

SN74HCT374PW Applications

There are a lot of Texas Instruments SN74HCT374PW Flip Flops applications.

• Communications
• Test & Measurement
• Safety Clamp
• Common Clocks
• Set-reset capability
• Functionally equivalent to the MC10/100EL29
• ATE
• Reduced system switching noise
• EMI reduction circuitry
• Pattern generators