SN74AS4374BNSRG4 Overview
The item is packaged in 20-SOIC (0.209, 5.30mm Width)cases. Package Tape & Reel (TR)embeds it. Tri-State, Non-Invertedis the output configured for it. The trigger configured with it uses Positive Edge. In this case, the electronic component is mounted in the way of Surface Mount. With a supply voltage of 4.5V~5.5V volts, it operates. A temperature of 0°C~70°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. JK flip flop belongs to the 74ASseries of FPGAs. Its output frequency should not exceed 125MHz Hz. In total, it contains 1 elements. There is a consumption of 150mAof quiescent energy. There are 20 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. Members of the 74AS4374family make up this object. It is powered from a supply voltage of 5V. In terms of electronic devices, this device belongs to the ASfamily of devices. There is an electronic part mounted in the way of Surface Mount. It is designed with 20 pins. It has a clock edge trigger type of Positive Edge. This part is included in FF/Latches. There are 8bits in this flip flop. It reaches 5.5Vwhen the supply voltage is maximal (Vsup). Normally, the supply voltage (Vsup) should be kept above 4.5V. In light of its reliable performance, this T flip flop is well suited for TAPE AND REEL. It runs on 5Vvolts of power. The D flip flop has no ports embedded. The output current of 48mA makes it feature maximum design flexibility. Currently, there are 8 input lines present. DUAL-RANK FLIP-FLOPis also one of its characteristics.
SN74AS4374BNSRG4 Features
Tape & Reel (TR) package
74AS series
20 pins
8 Bits
5V power supplies
SN74AS4374BNSRG4 Applications
There are a lot of Texas Instruments SN74AS4374BNSRG4 Flip Flops applications.
- ESD performance
- Pattern generators
- Computers
- Matched Rise and Fall
- Safety Clamp
- Data transfer
- Frequency Divider circuits
- Count Modes
- Shift Registers
- CMOS Process
