SN74LVC74AQDRQ1 Overview

It is embeded in 14-SOIC (0.154, 3.90mm Width) case. It is contained within the Tape & Reel (TR)package. It is configured with Differentialas an output. It is configured with a trigger that uses Positive Edge. Surface Mountis positioned in the way of this electronic part. A voltage of 2V~3.6Vis used as the supply voltage. Currently, the operating temperature is -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. The Automotive, AEC-Q100, 74LVCseries comprises this type of FPGA. This D flip flop should not have a frequency greater than 100MHz. It consumes 10μA of quiescent current without being affected by external factors. Terminations are 14. JK flip flop belongs to 74LVC74 family. A voltage of 2.7V provides power to the D latch. Its input capacitance is 5pFfarads. This D flip flop belongs to the family of LVC/LCX/Z. A part of the electronic system is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 14. A Positive Edgeclock edge trigger is used in this device. There is a base part number FF/Latchesfor the RS flip flops. It reaches the maximum supply voltage (Vsup) at 3.6V. Keeping the supply voltage (Vsup) above 2V is necessary for normal operation. Its flexibility is enhanced by 2 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TAPE AND REEL. There are 3.3V power supplies attached to it. There are no output lines on the JK flip flop.

SN74LVC74AQDRQ1 Features

Tape & Reel (TR) package
Automotive, AEC-Q100, 74LVC series
14 pins
3.3V power supplies

SN74LVC74AQDRQ1 Applications

There are a lot of Texas Instruments SN74LVC74AQDRQ1 Flip Flops applications.

• Counters
• Automotive
• Clock pulse
• Bounce elimination switch
• Computers
• Differential Individual
• Computing
• Test & Measurement
• Data transfer
• Frequency Divider circuits