SN74AS576DWRG4 Overview

20-SOIC (0.295, 7.50mm Width)is the way it is packaged. As part of the package Tape & Reel (TR), it is embedded. This output is configured with Tri-State, Inverted. It is configured with a trigger that uses Positive Edge. There is an electronic component mounted in the way of Surface Mount. A voltage of 4.5V~5.5Vis required for its operation. It is operating at a temperature of 0°C~70°C TA. This D latch has the type D-Type. The FPGA belongs to the 74AS series. Its output frequency should not exceed 125MHz Hz. There are 1 elements in it. As a result, it consumes 125mA quiescent current. Currently, there are 20 terminations. You can search similar parts based on 74AS576. Power is supplied from a voltage of 5V volts. Electronic devices of this type belong to the ASfamily. This electronic part is mounted in the way of Surface Mount. With its 20pins, it is designed to work with most electronic flip flops. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. It is designed with 8bits. There is a 5.5Vmaximum supply voltage (Vsup). Normally, the supply voltage (Vsup) should be above 4.5V. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. An electrical current of 5V volts is applied to it. A D flip flop with 2embedded ports is available. As a result of its output current of 48mA, it is very flexible in terms of design. It has 8lines. There is also a characteristic of BROADSIDE VERSION OF 534.

SN74AS576DWRG4 Features

Tape & Reel (TR) package
74AS series
20 pins
8 Bits
5V power supplies

SN74AS576DWRG4 Applications

There are a lot of Texas Instruments SN74AS576DWRG4 Flip Flops applications.

• Cold spare funcion
• Patented noise
• Buffered Clock
• Communications
• Divide a clock signal by 2 or 4
• Buffer registers
• Pattern generators
• Instrumentation
• ESCC
• Balanced Propagation Delays