SN74AUCH16374DGVR Overview

The item is packaged in 48-TFSOP (0.173, 4.40mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. T flip flop uses Tri-State, Non-Invertedas the output. The trigger configured with it uses Positive Edge. Surface Mountis occupied by this electronic component. A 0.8V~2.7Vsupply voltage is required for it to operate. It is at -40°C~85°C TAdegrees Celsius that the system is operating. D-Typeis the type of this D latch. In FPGA terms, D flip flop is a type of 74AUCHseries FPGA. It should not exceed 250MHzin terms of its output frequency. A total of 2elements are present in it. As a result, it consumes 20μA quiescent current and is not affected by external forces. There are 48 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. This D latch belongs to the family of 74AUCH16374. A voltage of 1.2V is used to power it. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the AUCfamily are electronic devices. This electronic part is mounted in the way of Surface Mount. With its 48pins, it is designed to work with most electronic flip flops. A Positive Edgeclock edge trigger is used in this device. The part is included in FF/Latches. Flip flops designed with 16bits are used in this part. Considering its reliability, this T flip flop is well suited for TR. The D flip flop has no ports embedded. It operates with 8 output lines.

SN74AUCH16374DGVR Features

Tape & Reel (TR) package
74AUCH series
48 pins
16 Bits

SN74AUCH16374DGVR Applications

There are a lot of Texas Instruments SN74AUCH16374DGVR Flip Flops applications.

• Shift Registers
• Power down protection
• Bounce elimination switch
• Synchronous counter
• Buffer registers
• ESD performance
• Divide a clock signal by 2 or 4
• Data Synchronizers
• Data transfer
• High Performance Logic for test systems