SN74LVC2G74MDCUTEP Overview

The item is packaged in 8-VFSOP (0.091, 2.30mm Width)cases. You can find it in the Tape & Reel (TR)package. T flip flop is configured with an output of Differential. It is configured with the trigger Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. The JK flip flop operates at 1.65V~5.5Vvolts. It is operating at -55°C~125°C TA. D-Typedescribes this flip flop. It belongs to the 74LVCseries of FPGAs. It should not exceed 200MHzin its output frequency. During its operation, it consumes 10μA quiescent energy. A total of 8 terminations have been made. Members of the 74LVC2G74family make up this object. A voltage of 3.3V is used to power it. Input capacitance of this device is 5pF farads. The electronic device belongs to the LVC/LCX/Zfamily. It is mounted in the way of Surface Mount. There are 8pins on it. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. 1bits are used in its design. The maximal supply voltage (Vsup) reaches 5.5V. The superior flexibility is achieved through the use of 1 circuits. A reliable performance of this D flip flop makes it well suited for use in TR. A power supply of 3.3Vis required to operate it.

SN74LVC2G74MDCUTEP Features

Tape & Reel (TR) package
74LVC series
8 pins
1 Bits
3.3V power supplies

SN74LVC2G74MDCUTEP Applications

There are a lot of Texas Instruments SN74LVC2G74MDCUTEP Flip Flops applications.

• Individual Asynchronous Resets
• Differential Individual
• Buffer registers
• Instrumentation
• Storage Registers
• Control circuits
• Bounce elimination switch
• Shift Registers
• Convert a momentary switch to a toggle switch
• Frequency Dividers