SN74AUP1G79DBVRG4 Overview
It is packaged in the way of SC-74A, SOT-753. There is an embedded version in the package Tape & Reel (TR). T flip flop uses Non-Invertedas the output. This trigger uses the value Positive Edge. It is mounted in the way of Surface Mount. A 0.8V~3.6Vsupply voltage is required for it to operate. The operating temperature is -40°C~85°C TA. This D latch has the type D-Type. In FPGA terms, D flip flop is a type of 74AUPseries FPGA. Its output frequency should not exceed 266MHz Hz. Despite external influences, it consumes 500nAof quiescent current. Currently, there are 5 terminations. If you search by 74AUP1G79, you will find similar parts. Power is supplied from a voltage of 1.2V volts. This T flip flop has a capacitance of 1.5pF farads at the input. Electronic devices of this type belong to the AUP/ULP/Vfamily. There is an electronic part mounted in the way of Surface Mount. Basically, it is designed with a set of 5 pins. The clock edge trigger type for this device is Positive Edge. This part is included in FF/Latches. This flip flop is designed with 1 Bits. Vsup reaches 3.6V, the maximal supply voltage. For normal operation, the supply voltage (Vsup) should be above 0.8V. Its flexibility is enhanced by 1 circuits. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. With an output current of 4mA, this device offers maximum design flexibility.
SN74AUP1G79DBVRG4 Features
Tape & Reel (TR) package
74AUP series
5 pins
1 Bits
SN74AUP1G79DBVRG4 Applications
There are a lot of Texas Instruments SN74AUP1G79DBVRG4 Flip Flops applications.
- Buffer registers
- Synchronous counter
- Buffered Clock
- Latch
- CMOS Process
- Bounce elimination switch
- Counters
- Parallel data storage
- Supports Live Insertion
- Single Down Count-Control Line
