SN74BCT574DBRE4 Overview

The item is packaged in 20-SSOP (0.209, 5.30mm Width)cases. It is included in the package Tape & Reel (TR). T flip flop uses Tri-State, Non-Invertedas the output. This trigger is configured to use Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates at 4.5V~5.5Vvolts. In the operating environment, the temperature is 0°C~70°C TA. There is D-Type type of electronic flip flop associated with this device. It is a type of FPGA belonging to the 74BCT series. Its output frequency should not exceed 77MHz Hz. A total of 1elements are contained within it. As a result, it consumes 8mA quiescent current and is not affected by external forces. A total of 20terminations have been recorded. The object belongs to the 74BCT574 family. Power is provided by a 5V supply. This T flip flop has a capacitance of 5.5pF farads at the input. An electronic device belonging to the family BCT/FBTcan be found here. There is an electronic component mounted in the way of Surface Mount. The 20pins are designed into the board. This device has the clock edge trigger type of Positive Edge. This part is included in FF/Latches. There are 8bits in this flip flop. It reaches the maximum supply voltage (Vsup) at 5.5V. For normal operation, the supply voltage (Vsup) should be kept above 4.5V. Considering the reliability of this T flip flop, it is well suited for TAPE AND REEL. It runs on 5Vvolts of power. There are 2 ports embedded in the flip flops. To operate, the chip has a total of 3 output lines. 8input lines are available for you to choose from.

SN74BCT574DBRE4 Features

Tape & Reel (TR) package
74BCT series
20 pins
8 Bits
5V power supplies

SN74BCT574DBRE4 Applications

There are a lot of Texas Instruments SN74BCT574DBRE4 Flip Flops applications.

• Storage registers
• ATE
• Modulo – n – counter
• Data transfer
• Automotive
• Bounce elimination switch
• 2 – Bit synchronous counter
• Single Down Count-Control Line
• Pattern generators
• ESD protection