SN74F377ADWG4 Overview
SOICis the packaging method. T flip flop is configured with an output of TTL. A total of 1elements are present in it. A total of 20terminations have been recorded. A voltage of 5V provides power to the D latch. It belongs to the family of electronic devices known as F/FAST. There is an electronic part that is mounted in the way of Surface Mount. The 20pins are designed into the board. This device exhibits a clock edge trigger type of Positive Edge. There is a FF/Latchesbase part number assigned to the RS flip flops. Considering its reliability, this T flip flop is well suited for TUBE. A total of 5V power supplies are needed to run it. Optimal efficiency requires a supply voltage of 5V. Furthermore, it has WITH HOLD MODEas a characteristic. A -1mAvalue is set for the high level output current. 20mA is the low level output current. A temperature below 70°Cis recommended for operation. It is recommended that the operating temperature be greater than 0°C. Despite its minimal supply voltage of 4.5V, it is capable of operating. 5.5Vis the maximum supply voltage it supports. We are able to achieve a frequency of 125MHz. The logic IC it uses is D FLIP-FLOP. As a result, it is equipped with 1 functions . This device is equipped with a pin count of 20. In addition to its maximum design flexibility, the output current of the flip flop is 20mA.
SN74F377ADWG4 Features
20 pins
5V power supplies
1 Functions
20 pin count
SN74F377ADWG4 Applications
There are a lot of Texas Instruments
SN74F377ADWG4 Flip Flops applications.
- Shift Registers
- Storage Registers
- Bounce elimination switch
- Data storage
- Data transfer
- Latch
- Registers
- Memory
- Frequency division
- Memory
