SN74HC175PWR Overview

It is packaged in the way of 16-TSSOP (0.173, 4.40mm Width). It is included in the package Cut Tape (CT). T flip flop uses Differentialas its output configuration. There is a trigger configured with Positive Edge. There is an electrical part that is mounted in the way of Surface Mount. With a supply voltage of 2V~6V volts, it operates. Currently, the operating temperature is -40°C~85°C TA. This logic flip flop is classified as type D-Type. It is a type of FPGA belonging to the 74HC series. A frequency of 60MHzshould not be exceeded by its output. In total, it contains 1 elements. There is a consumption of 8μAof quiescent energy. There are 16 terminations,D latch belongs to the 74HC175 family. Power is supplied from a voltage of 5V volts. A JK flip flop with a 3pFfarad input capacitance is used here. Electronic devices of this type belong to the HC/UHfamily. It is mounted in the way of Surface Mount. The electronic flip flop is designed with pins 16. Its clock edge trigger type is Positive Edge. The part is included in FF/Latches. Flip flops designed with 4bits are used in this part. It reaches the maximum supply voltage (Vsup) at 6V. The supply voltage (Vsup) should be kept above 2V for normal operation. Despite its superior flexibility, it relies on 4 circuits to achieve it. Compared to other similar T flip flops, this device offers reliable performance and is well suited for TR. For high efficiency, the supply voltage should be set to 5V. Featuring the maximum design flexibility, it has an output current of 5.2mA . There are 2 output lines on it.

SN74HC175PWR Features

Cut Tape (CT) package
74HC series
16 pins
4 Bits

SN74HC175PWR Applications

There are a lot of Texas Instruments SN74HC175PWR Flip Flops applications.

• Computers
• Bounce elimination switch
• Storage Registers
• Latch
• Instrumentation
• Shift registers
• ESD performance
• Cold spare funcion
• Power down protection
• Supports Live Insertion