SN74HC374NS Overview

20-SOIC (0.209, 5.30mm Width)is the packaging method. The Tubepackage contains it. T flip flop is configured with an output of Tri-State, Non-Inverted. In the configuration of the trigger, Positive Edgeis used. There is an electronic component mounted in the way of Surface Mount. The supply voltage is set to 2V~6V. In this case, the operating temperature is -40°C~85°C TA. It is an electronic flip flop with the type D-Type. This type of FPGA is a part of the 74HC series. There should be no greater frequency than 70MHzon its output. The list contains 1 elements. It consumes 8μA of quiescent A total of 20terminations have been recorded. This D latch belongs to the family of 74HC374. Power is provided by a 5V supply. The input capacitance of this T flip flop is 3pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. Devices in the HC/UHfamily are electronic devices. This part is included in FF/Latches. It reaches 6Vwhen the maximum supply voltage (Vsup) is applied. Normal operation requires a supply voltage (Vsup) above 2V. In light of its reliable performance, this T flip flop is well suited for TR. An electrical current of 2/6V volts is applied to it. A D flip flop with 2embedded ports is available.

SN74HC374NS Features

Tube package
74HC series
2/6V power supplies

SN74HC374NS Applications

There are a lot of Texas Instruments SN74HC374NS Flip Flops applications.

• Circuit Design
• Cold spare funcion
• QML qualified product
• Bus hold
• EMI reduction circuitry
• Digital electronics systems
• Memory
• Convert a momentary switch to a toggle switch
• Divide a clock signal by 2 or 4
• High Performance Logic for test systems