SN74LS107ADRE4 Overview
The flip flop is packaged in a case of 14-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tape & Reel (TR) package. The output it is configured with uses Differential. The trigger configured with it uses Negative Edge. There is an electric part mounted in the way of Surface Mount. A 4.75V~5.25Vsupply voltage is required for it to operate. A temperature of 0°C~70°C TAis used in the operation. There is JK Type type of electronic flip flop associated with this device. JK flip flop belongs to the 74LSseries of FPGAs. In order for it to function properly, its output frequency should not exceed 45MHz. As a result, it consumes 6mA quiescent current. Terminations are 14. It is a member of the 74LS107 family. The D flip flop is powered by a voltage of 5V . Devices in the LSfamily are electronic devices. There is an electronic part mounted in the way of Surface Mount. With its 14pins, it is designed to work with most electronic flip flops. It has a clock edge trigger type of Negative Edge. This RS flip flops is a part number FF/Latches. In order to achieve its superior flexibility, 2 circuits are used. This D flip flop is well suited for TAPE AND REEL based on its reliable performance. The D latch operates on 5V volts. With an output current of 8mA, it is possible to design the device in any way you want. There are 4 input Lines, which consist of an electronic circuit connected between the ac mains and the rectifier input stage of the switching power supply.
SN74LS107ADRE4 Features
Tape & Reel (TR) package
74LS series
14 pins
5V power supplies
SN74LS107ADRE4 Applications
There are a lot of Texas Instruments SN74LS107ADRE4 Flip Flops applications.
- Frequency division
- Parallel data storage
- Computing
- Guaranteed simultaneous switching noise level
- Reduced system switching noise
- Bus hold
- Count Modes
- ESCC
- Supports Live Insertion
- Computers
