SN74LS273DW Overview
The package is in the form of 20-SOIC (0.295, 7.50mm Width). The Tubepackage contains it. As configured, the output uses Non-Inverted. It is configured with a trigger that uses a value of Positive Edge. Surface Mountis occupied by this electronic component. The JK flip flop operates at 4.75V~5.25Vvolts. In the operating environment, the temperature is 0°C~70°C TA. It is an electronic flip flop with the type D-Type. JK flip flop belongs to the 74LSseries of FPGAs. Its output frequency should not exceed 40MHz. A total of 1elements are present in it. As a result, it consumes 27mA of quiescent current without being affected by external factors. A total of 20 terminations have been made. It is a member of the 74LS273 family. An input voltage of 5Vpowers the D latch. This D flip flop belongs to the family of LS. Surface Mount mounts this electronic component. This board has 20 pins. This device has the clock edge trigger type of Positive Edge. This device has the base part number FF/Latches. It is designed with 8bits. The D latch operates on 5V volts. In order to ensure high efficiency, the supply voltage should remain at 5V. Its output current of 8mAallows for maximum design flexibility. Currently, there are 2 input lines present. A total of 8 channels are available.
SN74LS273DW Features
Tube package
74LS series
20 pins
8 Bits
5V power supplies
SN74LS273DW Applications
There are a lot of Texas Instruments SN74LS273DW Flip Flops applications.
- Convert a momentary switch to a toggle switch
- Buffered Clock
- Latch
- ESCC
- Bounce elimination switch
- Dynamic threshold performance
- Asynchronous counter
- Modulo – n – counter
- Circuit Design
- Count Modes
