SN74LS74ADG4 Overview

It is packaged in the way of 14-SOIC (0.154, 3.90mm Width). D flip flop is embedded in the Tube package. T flip flop uses Differentialas its output configuration. The trigger it is configured with uses Positive Edge. This electronic part is mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 4.75V~5.25V volts. A temperature of 0°C~70°C TAis considered to be the operating temperature. There is D-Type type of electronic flip flop associated with this device. JK flip flop is a part of the 74LSseries of FPGAs. It should not exceed 33MHzin terms of its output frequency. In 14terminations, a transmission line is terminated with a JK flip flop that matches its characteristic impedance. The object belongs to the 74LS74 family. It is powered from a supply voltage of 5V. It belongs to the family of electronic devices known as LS. In this case, the electronic component is mounted in the way of Surface Mount. It is designed with 14 pins. This device's clock edge trigger type is Positive Edge. The RS flip flops belongs to FF/Latch base part number. To achieve this superior flexibility, 2 circuits are used. There are 5V power supplies attached to it. High efficiency requires the supply voltage to be maintained at 5V. Its output current of 8mAallows for maximum design flexibility. In order for the chip to function, it has 1output lines.

SN74LS74ADG4 Features

Tube package
74LS series
14 pins
5V power supplies

SN74LS74ADG4 Applications

There are a lot of Texas Instruments SN74LS74ADG4 Flip Flops applications.

• Synchronous counter
• Common Clocks
• Instrumentation
• Safety Clamp
• Count Modes
• Set-reset capability
• Control circuits
• High Performance Logic for test systems
• Pattern generators
• Balanced 24 mA output drivers