12ns, 12ns SPST - NO 75Ohm QUAD Analog Switches MAKE-BEFORE-BREAK 74LV4066 14 Pins 100nA 2.3V 14-VFQFN Exposed Pad
SOT-23
SN74LV4066ARGYRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 1 week ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
14-VFQFN Exposed Pad
Number of Pins
14
Weight
32.205058mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
2 (1 Year)
Number of Terminations
14
Resistance
75Ohm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Multiplexer or Switches
Technology
CMOS
Terminal Position
QUAD
Terminal Form
NO LEAD
Peak Reflow Temperature (Cel)
260
Number of Functions
4
Supply Voltage
2.3V
Terminal Pitch
0.5mm
Time@Peak Reflow Temperature-Max (s)
NOT SPECIFIED
Base Part Number
74LV4066
Output
SEPARATE OUTPUT
Pin Count
14
Qualification Status
Not Qualified
Power Supplies
2.5/5V
Number of Channels
4
Max Supply Voltage
5.5V
Min Supply Voltage
2V
Operating Supply Current
20μA
Max Supply Current
20μA
Throw Configuration
SPST
Propagation Delay
10 ns
Turn On Delay Time
25 ns
Input Voltage (Min)
2V
Supply Type
Single
Bandwidth
50MHz
Turn-Off Delay Time
25 ns
On-State Resistance (Max)
75Ohm
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
40 dB
Current - Leakage (IS(off)) (Max)
100nA
Channel Capacitance (CS(off), CD(off))
0.5pF 5.5pF
On-state Resistance Match-Nom
6Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
12ns, 12ns
Channel-to-Channel Matching (ΔRon)
2 Ω
Crosstalk
-45dB @ 1MHz
Switching
MAKE-BEFORE-BREAK
Voltage - Supply, Single (V+)
2V~5.5V
Normal Position
NO
Height
1mm
Length
3.5mm
Width
3.5mm
Thickness
900μm
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
SN74LV4066ARGYRG4 Product Details
SN74LV4066ARGYRG4 Overview
As the electronic part is packed in 14-VFQFN Exposed Pad, international shipping is convenient. To ensure high reliability, a new packaging method Tape & Reel (TR) is used. Surface Mount is where this multiplexer is located. The ratio between the number of multiplexer and demultiplexer circuits is 1:1. An extended operating temperature of -40°C~85°C TA degrees Celsius. Total terminations are 14. This electronic part offers high-quality output due to its 4 channels. In the case of a voltage supply of 2.3V volts, the electrical part can be powered up and run. A key feature of the 14 series is the inclusion of this electronic part as part of its design. Multiplexers built on a SPST - NO switching circuit are built. Try searching for 74LV4066 variants of the analog switch ic. Internally, this switch multiplexer has a resistance of 75Ohm. Please refer to the datasheets for 14 pins functions. Theswitch device is a typical Multiplexer or Switches. Users shouldn't supply more than 5.5V voltage to the switch device. Digital switch that provides Single power at a cost-effective price. It is recommended to use 2V as the lowest voltage for the electrical part. The switch device would be able to operate with 20μA current. This analogue multiplexer requires a voltage of 2V~5.5V when it drains from a single voltage supply. A voltage higher than 20μA may cause damage to the switch multiplexer. A total of SEPARATE OUTPUT outputs are available on this analog switch ic. The transfer of data can be performed over 50MHz bandwidths.
SN74LV4066ARGYRG4 Features
4 Channels Switch Circuit: SPST - NO 20μA Supply Current Bandwidth: 50MHz
SN74LV4066ARGYRG4 Applications
There are a lot of Texas Instruments SN74LV4066ARGYRG4 Analog Switches & Multiplexers ICs applications.