SN74LVC1G80DCKT Overview

It is packaged in the way of 5-TSSOP, SC-70-5, SOT-353. It is contained within the Tape & Reel (TR)package. T flip flop uses Invertedas the output. It is configured with a trigger that uses a value of Positive Edge. There is an electric part mounted in the way of Surface Mount. The JK flip flop operates with an input voltage of 1.65V~5.5V volts. Temperature is set to -40°C~125°C TA. Logic flip flops of this type are classified as D-Type. In terms of FPGAs, it belongs to the 74LVC series. A frequency of 160MHzshould not be exceeded by its output. It has been determined that there have been 5 terminations. The 74LVC1G80 family contains it. An input voltage of 1.8Vpowers the D latch. The input capacitance of this JK flip flopis 3.5pF farads. It belongs to the family of electronic devices known as LVC/LCX/Z. This electronic part is mounted in the way of Surface Mount. It is designed with 5 pins. The clock edge trigger type for this device is Positive Edge. This RS flip flops is a part number FF/Latches. Flip flops designed with 1bits are used in this part. Using 1 circuits, it is highly flexible. As a result of its reliable performance, this T flip flop is suitable for TR. An electrical current of 3.3V volts is applied to it. In addition to its maximum design flexibility, the output current of the T flip flop is 32mA. This D latch consumes 10μA quiescent current at all.

SN74LVC1G80DCKT Features

Tape & Reel (TR) package
74LVC series
5 pins
1 Bits
3.3V power supplies

SN74LVC1G80DCKT Applications

There are a lot of Texas Instruments SN74LVC1G80DCKT Flip Flops applications.

• Single Down Count-Control Line
• Data storage
• Shift registers
• Safety Clamp
• QML qualified product
• Memory
• Divide a clock signal by 2 or 4
• Common Clocks
• CMOS Process
• Instrumentation