3.9ns, 6.3ns SPST - NO 10Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LVC2G66 8 Pins 100nA 2.3V 8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
SOT-23
SN74LVC2G66DCTRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 4 days ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-LSSOP, 8-MSOP (0.110, 2.80mm Width)
Number of Pins
8
Weight
23.388357mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Resistance
10Ohm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Multiplexers or Switches
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
2.3V
Terminal Pitch
0.65mm
Base Part Number
74LVC2G66
Output
SEPARATE OUTPUT
Pin Count
8
Power Supplies
3.3V
Number of Channels
2
Max Supply Voltage
5.5V
Min Supply Voltage
1.65V
Operating Supply Current
10μA
Max Supply Current
10μA
Throw Configuration
SPST
Propagation Delay
600 ps
Turn On Delay Time
10 ns
Supply Type
Single
Bandwidth
300MHz
Turn-Off Delay Time
10.5 ns
-3db Bandwidth
300MHz
On-State Resistance (Max)
10Ohm
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
42 dB
Current - Leakage (IS(off)) (Max)
100nA
Channel Capacitance (CS(off), CD(off))
6pF
On-state Resistance Match-Nom
5Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
3.9ns, 6.3ns
Channel-to-Channel Matching (ΔRon)
2 Ω (Max)
Crosstalk
-58dB @ 1MHz
Switching
MAKE-BEFORE-BREAK
Switch-on Time-Max
5.6ns
Switch-off Time-Max
6.9ns
Voltage - Supply, Single (V+)
1.65V~5.5V
Normal Position
NO
Height
1.3mm
Length
2.95mm
Width
2.8mm
Thickness
1.29mm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
SN74LVC2G66DCTRG4 Product Details
SN74LVC2G66DCTRG4 Overview
Shipping overseas is convenient with the electronic component packed in 8-LSSOP, 8-MSOP (0.110, 2.80mm Width). Advanced packaging method Tape & Reel (TR) is used to provide high reliability. There is an analog multiplexer mounted in position Surface Mount. 1:1 is the number of circuits in the multiplexer and demultiplexer. Increasing operating temperature to around -40°C~85°C TA. A total of 8 terminations have been recorded. High-quality output is provided by the electronic component's 2 channels. When the electronic component is given a voltage of 2.3V, it should be turned on and run. It is part of the design of the 8 series that this electronic component is included. Unlike digital switches, these are based on SPST - NO switching circuits. Look for analog switch ic variants by searching with 74LVC2G66. Analog switches have 10Ohm internal resistance. Datasheets for 8 pin functions are available upon request. The analogue multiplexer in this example is a typical Multiplexers or Switches. normally, users should not supply switches with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. 1.65V is the lowest voltage the electrical component should receive. The analogue multiplexer could operate on 10μA current. Analogue multiplexers require a 1.65V~5.5V voltage to drain from a single voltage supply. If you put voltage higher than 10μA on the digital multiplexer, damage may occur. As far as the outputs go, this switch multiplexer utilizes SEPARATE OUTPUT of them. The transfer of data can be performed over 300MHz bandwidths.
SN74LVC2G66DCTRG4 Features
2 Channels Switch Circuit: SPST - NO 10μA Supply Current -3db Bandwidth: 300MHz Bandwidth: 300MHz
SN74LVC2G66DCTRG4 Applications
There are a lot of Texas Instruments SN74LVC2G66DCTRG4 Analog Switches & Multiplexers ICs applications.