3.9ns, 6.3ns SPST - NO 10Ohm DUAL Analog Switches MAKE-BEFORE-BREAK 74LVC2G66 8 Pins 100nA 2.3V 8-VFSOP (0.091, 2.30mm Width)
SOT-23
SN74LVC2G66DCURG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 3 days ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
8-VFSOP (0.091, 2.30mm Width)
Number of Pins
8
Weight
10.007382mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
1 (Unlimited)
Number of Terminations
8
Resistance
10Ohm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Multiplexers or Switches
Technology
CMOS
Terminal Position
DUAL
Terminal Form
GULL WING
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
2.3V
Terminal Pitch
0.5mm
Base Part Number
74LVC2G66
Output
SEPARATE OUTPUT
Pin Count
8
Power Supplies
3.3V
Number of Channels
2
Max Supply Voltage
5.5V
Min Supply Voltage
1.65V
Operating Supply Current
10μA
Max Supply Current
10μA
Throw Configuration
SPST
Propagation Delay
600 ps
Turn On Delay Time
10 ns
Supply Type
Single
Bandwidth
300MHz
Turn-Off Delay Time
10.5 ns
-3db Bandwidth
300MHz
On-State Resistance (Max)
10Ohm
Multiplexer/Demultiplexer Circuit
1:1
Off-state Isolation-Nom
42 dB
Current - Leakage (IS(off)) (Max)
100nA
Channel Capacitance (CS(off), CD(off))
6pF
On-state Resistance Match-Nom
5Ohm
Switch Circuit
SPST - NO
Switch Time (Ton, Toff) (Max)
3.9ns, 6.3ns
Channel-to-Channel Matching (ΔRon)
2 Ω (Max)
Crosstalk
-58dB @ 1MHz
Switching
MAKE-BEFORE-BREAK
Switch-on Time-Max
5.6ns
Switch-off Time-Max
6.9ns
Voltage - Supply, Single (V+)
1.65V~5.5V
Normal Position
NO
Height
900μm
Length
2.3mm
Width
2mm
Thickness
850μm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
SN74LVC2G66DCURG4 Product Details
SN74LVC2G66DCURG4 Overview
The electronic component is convenient to ship overseas because it is packed in a 8-VFSOP (0.091, 2.30mm Width). To ensure high reliability, a new packaging method Tape & Reel (TR) is used. In Surface Mount, this analog switch is mounted. In the multiplexer and demultiplexer, 1:1 represents the number of circuits. The operating temperature is extended to around -40°C~85°C TA. In total, there have been 8 terminations. As a result of its 2 channels, this electronic component provides high-quality output. It is safe to turn on and run the electronic component with a 2.3V voltage supply. Into the electrical component body are injected 8 pins. Based on SPST - NO switching circuits, these analog multiplexers work. Try searching for the analog switch ic with 74LVC2G66 if you are looking for variants. A 10Ohm internal resistance characterizes this multiplexer. For functions related to 8 pins, please refer to the datasheets. Theswitch device is a typical Multiplexers or Switches. It is normally recommended that users do not supply the multiplexer with voltages higher than 5.5V. A analog switch ic that has a cost-effective Single supply type. 1.65V should be the lowest voltage fed to the electronic component. It would be sufficient to run this analogue multiplexer with 10μA current. This analog switch requires a voltage of 1.65V~5.5V to drain from a single voltage supply. If you put voltage higher than 10μA on the digital multiplexer, damage may occur. This analog switch ic utilizes SEPARATE OUTPUT output. There are various bandwidths available for data transfer.
SN74LVC2G66DCURG4 Features
2 Channels Switch Circuit: SPST - NO 10μA Supply Current -3db Bandwidth: 300MHz Bandwidth: 300MHz
SN74LVC2G66DCURG4 Applications
There are a lot of Texas Instruments SN74LVC2G66DCURG4 Analog Switches & Multiplexers ICs applications.