SN74LVC2G66YEAR Overview

As the electronic part is packed in 8-XFBGA, DSBGA, international shipping is convenient. The advanced packaging method Cut Tape (CT) provides high reliability. A switch device like this is mounted in Surface Mount. 1:1 is the ratio between multiplexers and demultiplexers. An extended operating temperature of -40°C~85°C TA degrees Celsius. In total, there are 8 terminations. The electronic part delivers high-quality output through its 1 channels. With a 2.3V voltage supply, the electrical component should be turned on and run. As part of its design, the 8 series is equipped with this electronic component. Based on SPST - NO switching circuits, these analog multiplexers work. The circuits in this analogue multiplexer number 2. Try searching for 74LVC2G66 variants of the analog switch ic. This digital multiplexer has 10Ohm internal resistance. Datasheets for functions of 8 pins are available. It is a typical Multiplexer or Switches analog multiplexer. A voltage higher than 5.5V should not normally be supplied to the switches. Analogue multiplexers of the Single supply type that are cost-effective. 1.65V is the lowest voltage the electrical component should receive. The switch device would be able to operate with 10μA current. The voltage required by this switch device is 1.65V~5.5V, draining from a single voltage supply. If you put voltage higher than 1μA on the digital multiplexer, damage may occur. There are SEPARATE OUTPUT outputs on this analog switch ic.

SN74LVC2G66YEAR Features

1 Channels
Switch Circuit: SPST - NO
10μA Supply Current
-3db Bandwidth: 300MHz

SN74LVC2G66YEAR Applications

There are a lot of Texas Instruments SN74LVC2G66YEAR Analog Switches & Multiplexers ICs applications.

• 65 V DACs
• Cable Telephony – NIU, Set-Top Box, Home Side Box
• Avionics and Military Systems
• Battery Powered Instruments
• Central office
• Audio/video switches
• Digital access cross connects
• Digital cross connects (DSX-1)
• E1 Multiplexer
• Microprocessor Controlled Analog Systems