SN74LVC74AQDREP Overview

The item is packaged in 14-SOIC (0.154, 3.90mm Width)cases. D flip flop is included in the Tape & Reel (TR)package. It is configured with Differentialas an output. This trigger is configured to use Positive Edge. There is an electronic component mounted in the way of Surface Mount. With a supply voltage of 2V~3.6V volts, it operates. The operating temperature is -40°C~125°C TA. It belongs to the type D-Typeof flip flops. This type of FPGA is a part of the 74LVC series. In order for it to function properly, its output frequency should not exceed 100MHz. It consumes 10μA of quiescent A total of 14 terminations have been made. The 74LVC74family includes it. A voltage of 2.7V is used to power it. The input capacitance of this JK flip flopis 5pF farads. In this case, the D flip flop belongs to the LVC/LCX/Zfamily. Electronic part Surface Mountis mounted in the way. It is designed with 14 pins. There is a clock edge trigger type of Positive Edgeon this device. It is part of the FF/Latchesbase part number family. Vsup reaches its maximum value at 3.6V. For normal operation, the supply voltage (Vsup) should be kept above 2V. Its superior flexibility is attributed to its use of 2 circuits. As a result of its reliability, this D flip flop is ideally suited for TR. It operates from 3.3V power supplies. This T flip flop features a maximum design flexibility due to its output current of 24mA. It is designed with 1 output lines.

SN74LVC74AQDREP Features

Tape & Reel (TR) package
74LVC series
14 pins
3.3V power supplies

SN74LVC74AQDREP Applications

There are a lot of Texas Instruments SN74LVC74AQDREP Flip Flops applications.

• Synchronous counter
• ESD performance
• Storage registers
• Clock pulse
• Shift Registers
• Registers
• Guaranteed simultaneous switching noise level
• Buffered Clock
• Single Up Count-Control Line
• Shift registers