SN74LVC821APW Overview

24-TSSOP (0.173, 4.40mm Width)is the packaging method. It is contained within the Tubepackage. There is a Tri-State, Non-Invertedoutput configured with it. The trigger configured with it uses Positive Edge. Surface Mountis in the way of this electric part. With a supply voltage of 1.65V~3.6V volts, it operates. It is operating at a temperature of -40°C~85°C TA. It belongs to the type D-Typeof flip flops. In this case, it is a type of FPGA belonging to the 74LVC series. Its output frequency should not exceed 150MHz. There are 1 elements in it. There is 10μA quiescent consumption. There are 24 terminations, which are the practice of ending a transmission line with a device that matches the characteristic impedance of the line. The object belongs to the 74LVC821 family. The power supply voltage is 1.8V. The input capacitance of this T flip flop is 5pF farads, which is defined as the capacitance between the input terminals of an op amp with either input grounded. It belongs to the family of electronic devices known as LVC/LCX/Z. There is an electronic part that is mounted in the way of Surface Mount. It is designed with 24 pins. This device exhibits a clock edge trigger type of Positive Edge. It is part of the FF/Latchesbase part number family. To achieve this superior flexibility, 8 circuits are used. The flip flop has 2embedded ports. It offers maximum design flexibility with its output current of 24mA. It has 3 output lines to operate.

SN74LVC821APW Features

Tube package
74LVC series
24 pins

SN74LVC821APW Applications

There are a lot of Texas Instruments SN74LVC821APW Flip Flops applications.

• EMI reduction circuitry
• Modulo – n – counter
• Buffer registers
• Divide a clock signal by 2 or 4
• Instrumentation
• Parallel data storage
• Latch
• Consumer
• Asynchronous counter
• 2 – Bit synchronous counter