SN74LVTH16374ZQLR Overview
The flip flop is packaged in 56-VFBGA. You can find it in the Tape & Reel (TR)package. As configured, the output uses Tri-State, Non-Inverted. It is configured with a trigger that uses Positive Edge. The electronic part is mounted in the way of Surface Mount. The JK flip flop operates at a voltage of 2.7V~3.6V. A temperature of -40°C~85°C TAis used in the operation. Logic flip flops of this type are classified as D-Type. In this case, it is a type of FPGA belonging to the 74LVTH series. There should be no greater frequency than 160MHzon its output. There are 2 elements in it. It consumes 190μA of quiescent Terminations are 56. This D latch belongs to the family of 74LVTH16374. A voltage of 3.3V is used as the power supply for this D latch. There is 3pF input capacitance for this T flip flop. The electronic device belongs to the LVTfamily. Electronic part Surface Mountis mounted in the way. This board has 56 pins. There is a clock edge trigger type of Positive Edgeon this device. The RS flip flops belongs to FF/Latches base part number. The flip flop is designed with 16bits. Vsup reaches 3.6V, the maximal supply voltage. As a result of its reliable performance, this T flip flop is suitable for TAPE AND REEL. The D flip flop has no ports embedded. In order to ensure high efficiency, the supply voltage should remain at 3.3V.
SN74LVTH16374ZQLR Features
Tape & Reel (TR) package
74LVTH series
56 pins
16 Bits
SN74LVTH16374ZQLR Applications
There are a lot of Texas Instruments SN74LVTH16374ZQLR Flip Flops applications.
- Common Clocks
- Individual Asynchronous Resets
- Set-reset capability
- Safety Clamp
- Power down protection
- ESCC
- Data Synchronizers
- Shift registers
- Storage Registers
- CMOS Process
