SN74S112ADRE4 Overview
In the form of 16-SOIC (0.154, 3.90mm Width), it has been packaged. The Tape & Reel (TR)package contains it. As configured, the output uses Differential. This trigger uses the value Negative Edge. There is an electronic component mounted in the way of Surface Mount. Powered by a 4.75V~5.25Vvolt supply, it operates as follows. Currently, the operating temperature is 0°C~70°C TA. Logic flip flops of this type are classified as JK Type. It is a type of FPGA belonging to the 74S series. This D flip flop should not have a frequency greater than 125MHz. The list contains 2 elements. This process consumes 25mA quiescents. There have been 16 terminations. D latch belongs to the 74S112 family. A voltage of 5V is used as the power supply for this D latch. Electronic devices of this type belong to the Sfamily. It is mounted in the way of Surface Mount. There are 16pins on it. Edge triggering is a type of triggering that allows a circuit to become active at the positive edge or the negative edge of the clock signal. The clock edge trigger type of this device is Negative Edge. This RS flip flops is a part number FF/Latches. Considering its reliability, this T flip flop is well suited for TAPE AND REEL. In order for the device to operate, it requires 5V power supplies. As a result of its output current of 20mA, it is very flexible in terms of design. It is reported that there are 5 input lines.
SN74S112ADRE4 Features
Tape & Reel (TR) package
74S series
16 pins
5V power supplies
SN74S112ADRE4 Applications
There are a lot of Texas Instruments SN74S112ADRE4 Flip Flops applications.
- ESD protection
- Frequency Divider circuits
- Asynchronous counter
- Latch
- Single Down Count-Control Line
- Computers
- Convert a momentary switch to a toggle switch
- Common Clocks
- Circuit Design
- Differential Individual
