TL2842P Overview

In the 8-DIP (0.300, 7.62mm) package, the switching controller meets most application requirements. There is sufficient capacity to generate switching controller for outputs 1. There is a Tube solid enclosure around the pmic. With this function, you can deal with Transistor Driver dc switching's outputs (s). DC control operates at 10V~30V volts and has 10V~30V supply voltage. Suitable for working in an dc switcher that has a -40°C~85°C TA. It can switch at Up to 500kHz. As it has a Through Hole value, it can be used for general dc dc regulator. To provide efficient switching control, Frequency Control is included in the dcdc regulator. A SWITCHING REGULATOR analog integrated circuit is connected to the switch converters. DUAL are the position of the terminal of the switching converters. Various 8 terminations. This dc dc converter ic uses a variety of control techniques, including PULSE WIDTH MODULATION. There is a DC switcher's nominal voltage of 15V. In addition to "TL2842", there are other relevant dc to dc converter ics you can find. There are 8 pins on switching converter. Specifically, switching converter falls under the Switching Regulator or Controllers category. DC regulator outputs 30V voltage based on test statistics. A starting point for a project is to note down the dc dc regulator's usual output current, which is 200mA. Voltage regulator dc to dc is designed to operate at 100 % duty cycle during power-ups and power-downs to ensure reliability. A frequency of 500kHz is set for the switching controller. In dormant mode, 11mA is used. It is possible to set the input voltage as 5.5V for nominal working statuses. This voltage controller requires a supply voltage of 15V. It is important that the controller is supplied with 30mA more than 30mA volts of current.

TL2842P Features

Transistor Driver Outputs
Switching Frequency: Up to 500kHz
Frequency Control
PULSE WIDTH MODULATION
Max Duty Cycle: 100 %
Frequency: 500kHz

TL2842P Applications

There are a lot of Texas Instruments
TL2842P DC to DC converter applications.

• Network technology
• Automation technology
• CMM
• Various precision measuring instruments
• Various precision measuring detectors
• Flaw detection equipment
• Balance equipment
• Industrial robots
• Industrial controllers
• Die casting equipment