TLC393IPWG4 Overview

The product is packaged in 8-TSSOP (0.173, 4.40mm Width) in order to facilitate transportation.Output type of this comparator is MOS, Open-Drain .The part is shipped by Tube .The comparator has 8 terminals.The electrical component in this case belongs to the Comparator family.This comparator is capable of handling a wide range of tasks if it is supplied with a voltage of 5V .This is a typical comparator of type General Purpose .Currently, it consists of only 2 elements.The device includes 8 pins.In general, mounting type Surface Mount is recommended.Ideally, the operating temperature should be set at -40°C~85°C in order to prevent malfunction.8 pins are available on the comparator.In order to find a solution that meets your specific needs, search TLC393 for more pin-to-pin solutions.A quiescent current of 65μA is observed in this comparator.A Surface Mount is provided for mounting it onto a PCB or another board.Normal use of the device should require a nominal supply current of 40μA .An excess of current supply over 40μA could result in malfunction of the comparator.A power supply of 5V is sufficient for the operation of the device.The part belongs to the LinCMOS™ series of comparator parts.For normal operation, the operating supply voltage must be 5V .

TLC393IPWG4 Features

MOS, Open-Drain output capability
General Purpose IC
Employing 2 elements
Operates under -40°C~85°C
Quiescent Current: 65μA

TLC393IPWG4 Applications

There are a lot of Texas Instruments
TLC393IPWG4 linear comparators applications.

• Self-diagnostics
• Lithium ion battery monitoring
• Battery management and protection
• Current and voltage sensing
• Analog front end
• Power management
• Point of load regulators
• DC/DC and AC/DC power supplies
• System control and monitoring
• Wearable Devices