TPS2390DGKG4 Overview

This is included in the 8-TSSOP, 8-MSOP (0.118, 3.00mm Width) package.At present, 1 channels are available.It's packaged in a Tube shape.Total terminations are 8.Device position DUAL is its terminal position.In total, there are 8 pins on it.According to Surface Mount, it has been set up.Electric components of this type are classified as Hot Swap Controller.For reliable operation, set the temperature to -40°C~85°C.Application -48V is available on the device.As you can see in Latched Fault, UVLO, it's featured.The device should be able to be powered by a -80V~-36VV power source.There are numbers in the TPS2390 family that include it.8 pins are used in operation.There are Current Limit, Fault Timeout, Slew Rate features that can be programmed.In the present, there is a shortage of 700μA.Positioned in direction of Surface Mount, it is at a right angle.Hot Swap requires 1.5mA volts of current to operate.65V output voltage enables high efficiency.

TPS2390DGKG4 Features

The terminal position of 8
Features of Latched Fault, UVLO
Programmable features of Current Limit, Fault Timeout, Slew Rate
Output voltage of 65V

TPS2390DGKG4 Applications

There are a lot of Texas Instruments
TPS2390DGKG4 hot swap controllers applications.

• Avionics systems
• Safe board insertion and extraction
• Industrial computers and servers
• Redundant-array-of-independent-disk (RAID) storage
• Other forms of communications infrastructure
• Board or blade insertion into live backplanes
• Backplane
• Loads
• Distributed power systems
• Redundant negative voltage supplies