TPS3828-50DBVTG4 Overview

There are 5 mounting terminals on the voltage supervisor, each of which has a different function. Tape & Reel (TR)-packaging is used. Power management is possible to find a series of 1 functions. There are 1 channels on this power managment ic that can be found in a series. The purpose of this IC power is to provide you with a reference of SC-74A, SOT-753 functions. It is a IC power that shares many benefits with other products from the Simple Reset/Power-On Reset line. IC management is specified that the package peak reflow temperature should be 260. The supervisor is always powered by a 3.3V volt supply. In a 1 supply voltage, the PMIC chip conducts. Surface Mount mounts IC management. A IC power such as this can be classified as a Power Management Circuits power management system. In total, it has 5 pins on IC management. Power managment ic pin count is 5. I should note that the minimum supply voltage (Vsup) for this IC management should be at least 1.1V, which is the minimum supply voltage that should be applied. During this IC power, the maximum supply voltage (Vsup) should not exceed 5.5V volts. The recommended mounting type for IC management is Surface Mount. It is recommended that the supervisor be set to this temperature: -40°C~85°C TA. While in operation, this supervisor has a voltage output of Open Drain or Open Collector. There is a supply current of 15μA for the power management. A similar IC managements number of the manufacturer can always be found by using TPS3828, the base power ics number. A maximum supply temperature of 25μA can be used.

TPS3828-50DBVTG4 Features

Simple Reset/Power-On Reset type
Minimum supply voltage of 1.1V
15μA operating supply current

TPS3828-50DBVTG4 Applications

There are a lot of Texas Instruments TPS3828-50DBVTG4 Voltage Supervisors applications.

• Telecommunications equipment
• Network equipment
• Embedded computing
• Utility meter
• Power distribution systems of CCU
• Magnetic resonance imaging
• Set top box
• Dash board
• Smartphones
• Urban rail transit weak current power monitoring