TPS40200MDREPG4 Overview

Capsuled in the 8-SOIC (0.154, 3.90mm Width) package, the switching controller suits most application needs. The dc motor controller is adquate to generate for 1 outputs. The pmic is packaged in Tape & Reel (TR) solid enclosure. It is capable of dealing with Transistor Driver dc switching's output (s). dc switching'sThe supply and operating voltage of the dc control are 4.5V~52V. Qualified to work in a -55°C~125°C TJ dc switcher. This switching controller can switch at 35kHz~500kHz. Surface Mount makes it suitable for general dc dc regulator. The dcdc regulator features Frequency Control, Soft Start for efficient switching control. The switch converters are connected to a SWITCHING CONTROLLER analog IC. Terminal (s) of the switching converters are designed at the DUAL position. 8 terminations with a variety of function. To name a few of the control techniques these dc dc converter ics adapt, it includes PULSE WIDTH MODULATION. 12V nominal DC switcher's voltage input. Other relevant dc to dc converter ics can be found by searching "TPS40200". Switching converter has a total of 8 pins. According to the test statistics, DC regulator outputs 46V voltage. The dc dc regulator's usual output current is 3A, which should be noted down when you start a project. The max frequency of the pmic can reach 500kHz. DC to DC voltage regulator has a value of ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7 TO 45.24V; 5 VOLT OUTPUT ALSO AVAILABLE to better satisfy the need. It is suggested that users apply 52V to the voltage regulator dc to dc in order to run it safely and reliably in a circuit. The dc switching utilizes 1.5mA when it is in a dormant state. Because the dc switcher's maximum input voltage is 52V users must limit the voltage accordingly. Switching controller is necessary to have a supply voltage of 4.5V. The dc switcher will not provide an output current greater than 3A. The switching converter can output 46V volts at its utmost, according to the datasheet. The voltage controller's lowest voltage output is not less than 700mV.

TPS40200MDREPG4 Features

Transistor Driver Outputs
Switching Frequency: 35kHz~500kHz
Frequency Control, Soft Start
PULSE WIDTH MODULATION
ALSO OPERATES IN ADJUSTABLE MODE FROM 0.7 TO 45.24V; 5 VOLT OUTPUT ALSO AVAILABLE

TPS40200MDREPG4 Applications

There are a lot of Texas Instruments
TPS40200MDREPG4 DC to DC converter applications.

• CNC system
• Servo drive system
• Digital display device
• Linear guide
• Ball screw pair
• Computer application technology
• Network technology
• Automation technology
• CMM
• Various precision measuring instruments