35ns, 25ns SPDT 300mOhm DUAL Analog Switches BREAK-BEFORE-MAKE TS3A24159 10 Pins 10nA 1.8V 10-VFDFN Exposed Pad
SOT-23
TS3A24159DRCRG4 Datasheet
non-compliant
In-Stock: 0 items
Specifications
Name
Value
Type
Parameter
Factory Lead Time
6 Weeks
Lifecycle Status
ACTIVE (Last Updated: 3 days ago)
Mount
Surface Mount
Mounting Type
Surface Mount
Package / Case
10-VFDFN Exposed Pad
Number of Pins
10
Weight
26.109911mg
Operating Temperature
-40°C~85°C TA
Packaging
Tape & Reel (TR)
JESD-609 Code
e4
Pbfree Code
yes
Part Status
Active
Moisture Sensitivity Level (MSL)
2 (1 Year)
Number of Terminations
10
Resistance
300mOhm
Terminal Finish
Nickel/Palladium/Gold (Ni/Pd/Au)
Subcategory
Multiplexer or Switches
Terminal Position
DUAL
Peak Reflow Temperature (Cel)
260
Number of Functions
2
Supply Voltage
1.8V
Terminal Pitch
0.5mm
Base Part Number
TS3A24159
Output
SEPARATE OUTPUT
Pin Count
10
Power Supplies
1.8/3V
Number of Channels
2
Number of Circuits
2
Max Supply Voltage
3.6V
Min Supply Voltage
1.65V
Operating Supply Current
15nA
Nominal Supply Current
15nA
Max Supply Current
100nA
Turn On Delay Time
40 ns
Supply Type
Single
Bandwidth
23MHz
Turn-Off Delay Time
30 ns
On-State Resistance (Max)
300mOhm
Multiplexer/Demultiplexer Circuit
2:1
Off-state Isolation-Nom
73 dB
Current - Leakage (IS(off)) (Max)
10nA
Channel Capacitance (CS(off), CD(off))
90pF
On-state Resistance Match-Nom
0.02Ohm
Switch Circuit
SPDT
Switch Time (Ton, Toff) (Max)
35ns, 25ns
Charge Injection
9pC
Channel-to-Channel Matching (ΔRon)
10m Ω
Crosstalk
-96dB @ 1MHz
Switching
BREAK-BEFORE-MAKE
Switch-on Time-Max
75ns
Switch-off Time-Max
35ns
Voltage - Supply, Single (V+)
1.65V~3.6V
Signal Current-Max
0.1A
Height
1mm
Length
3mm
Width
3mm
Thickness
900μm
Radiation Hardening
No
RoHS Status
ROHS3 Compliant
Lead Free
Lead Free
Pricing & Ordering
Quantity
Unit Price
Ext. Price
1
$0.843378
$0.843378
10
$0.795640
$7.9564
100
$0.750604
$75.0604
500
$0.708116
$354.058
1000
$0.668035
$668.035
TS3A24159DRCRG4 Product Details
TS3A24159DRCRG4 Overview
Shipping overseas is convenient due to the electrical component's packing in 10-VFDFN Exposed Pad. Advanced packaging method Tape & Reel (TR) is used to provide high reliability. This analog switch is mounted in Surface Mount. Multiplexers and demultiplexers have a number of circuits 2:1. Around -40°C~85°C TA is the extended operating temperature. Total terminations are 10. Due to its 2 channels, the electrical component produces high-quality output. When a voltage supply of 1.8V is used, the electronic component should be turned on and run. There is an electrical component included in the 10 series. A SPDT switching circuit is used to build these analog multiplexers. It consists of 2 circuits. Try searching for the analog switch ic with TS3A24159 if you are looking for variants. In this multiplexer, the internal resistance is 300mOhm. You can find the functions of the 10 pins in the datasheets. There is a standard Multiplexer or Switches analogue multiplexer here. In normalcircumstances, users should not exceed 3.6V volts for the multiplexer. Analogue multiplexers of the Single supply type that are cost-effective. The lowest voltage the electronic part should receive is 1.65V. An operating current of 15nA would be sufficient for this switch device. The voltage required by this switch device is 1.65V~3.6V, draining from a single voltage supply. If put voltage greater than 100nA on the device, damage may be caused to the analogue multiplexer. The outputs of this digital multiplexer are SEPARATE OUTPUT in number. In 23MHz-bandwidths, data can be transferred.
TS3A24159DRCRG4 Features
2 Channels Switch Circuit: SPDT 15nA Supply Current Bandwidth: 23MHz
TS3A24159DRCRG4 Applications
There are a lot of Texas Instruments TS3A24159DRCRG4 Analog Switches & Multiplexers ICs applications.